You're in Building Supplies
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | Pre-hung & Factory FinishedMatching exterior brick mold and interior casing included36" Single door with 12" sidelightsTriple glazed decorative full beveled glass4" X 4" solid ball bearing hingesReplaceable weather-stripping and door shoe Adjustable... ... more | FREE shipping go to store |
Pre-hung & Factory FinishedMatching exterior brick mold and interior casing included36" Single door with 12" sidelightsTriple glazed decorative full beveled glass4" X 4" solid ball bearing hingesReplaceable weather-stripping and door shoe Adjustable... ... more | $3,399.99 $3,199.99 FREE shipping go to store |
Pre-hung & Factory FinishedMatching exterior brick mold and interior casing included36" Single door with 12" sidelightsTriple glazed decorative full beveled glass4" X 4" solid ball bearing hingesReplaceable weather-stripping and door shoe Adjustable... ... more | FREE shipping go to store |
The Commercial Industrial Style Interconnect Lever Combo Pack is the product of a better design, higher quality materials, and better manufacturing. Each lever features a solid steel chassis, adjustable steel latches with a square drive, and a solid... ... more | FREE shipping go to store |
These ball bullet catch and strikes are constructed of solid brass and steel components. Each catch features fully adjustable barrels, and they install on the top edges of hinged-swinging doors, or on their vertical edges. These ball catches help... ... more | go to store |
These ball bullet catch and strikes are constructed of solid brass and steel components. Each catch features fully adjustable barrels, and they install on the top edges of hinged-swinging doors, or on their vertical edges. These ball catches help... ... more | go to store |
This is a plain back tandem roller assembly with two 1-1/4 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is a plain... ... more | go to store |
This sliding patio door roller assembly is constructed of stainless steel and comes with a 1-1/4 in. outside diameter, center-grooved wheel with ball bearings. The housing height is fully adjustable, with a minimum collapsed height of 1-5/16 in..... ... more | go to store |
This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other vinyl patio door manufacturers. The housing is 3/4 in. wide and... ... more | go to store |
This sliding patio door roller assembly is constructed from steel. It features a 1 In. ball bearing wheel with an adjustable steel housing. This type of roller assembly is quick and easy to install. | Prime-Line Single 1-1/8 in. Ball Bearing Roller,... ... more | go to store |
This is a F-tab tandem roller assembly with two 1-1/8 in. steel ball bearing rollers. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This is a plain back tandem roller assembly used by several patio door manufacturers. It has an inner housing with tandem inline 1-1/2 in. concave (center grooved) steel ball bearing rollers set in a stamped steel housing with rear adjustment. The... ... more | FREE shipping go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave nylon ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The housing is 3/4 in. wide with a 7/8 in. flare and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is... ... more | go to store |
This patio door roller is constructed from steel and has a diameter of 1-1/4 in. It comes affixed to an adjustable aluminum housing assembly. This roller is used on Miller Industries and similar styled patio doors. | Prime-Line Sliding Door Roller... ... more | go to store |
This is a unique housing tandem roller assembly most often found on Andersen wood patio doors as well as a variety of other manufacturers of wood patio doors. It has tandem 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 7/8 in. flare, and 1-9/16 in. tall. It is rear adjusting with a 1/4-20 threaded... ... more | go to store |
This handle is a gray internal style latching patio door handle found on Viking, as well as a variety of other patio door manufacturers. A common internal style latch; the handle body is diecast steel with a wood handle attached. Included is a... ... more | FREE shipping go to store |
This sliding patio door handle set is constructed of mixed materials including wood and diecast components, and it is designed to fit 1 in. thick internally latching type doors using a 3-15/16 in. hole center spacing. The outside non-keyed locking... ... more | go to store |
This roller is constructed from steel. It comes affixed to an adjustable steel housing. Used by Air Control, Howmet, Krestmark, and a variety of other sliding glass door manufacturers. | Prime-Line Sliding Door Roller Assembly w/ 1-1/2 in. Steel... ... more | go to store |
This is a U-back, patio door roller assembly with a flat 1-1/2 in. ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw or bolt is... ... more | go to store |
Surface-mounted closer is fully rust and weather resistant making it suitable for exterior use. A single torsion spring is ideal for swinging screen doors and pool gates up to 57 lbs. (26kg) with an adjustable closing speed. Neat, compact, and... ... more | go to store |
Surface-mounted closer is fully rust and weather resistant making it suitable for exterior use. A single torsion spring is ideal for swinging screen doors and pool gates up to 57 lbs. (26kg) with an adjustable closing speed. Neat, compact, and... ... more | go to store |
This standard duty capacity closer is used on out-swinging wood or metal doors. It also features an adjustable closing speed. Best used on medium-weight installations. | Prime-Line Pneumatic Door Closer, 10-1/2 in, Canada, Adjustable, Medium (Single... ... more | go to store |
This sliding patio door roller assembly is constructed from stainless steel. It features a 1-1/2 In. ball bearing roller. This type of patio door roller has an adjustable stainless steel housing assembly. | Prime-Line Sliding Door Roller Assembly,... ... more | go to store |
Cast inside pull and outside pull; for mortise style doors. 3-15/16 mounting hole centers. Comes in an almond finish. | Prime-Line Almond Diecast, Inside & Outside Mortise Style Patio Door Handles (Single Pack) 11.5 H x 5.0 W x 1.9 D in Brown | Wayfair ... more | FREE shipping go to store |
This is a 3-11/16 in. mortise lock with a steel housing and hook. The hook is spring-loaded, with adjustable hook projection that extends to spring-loaded locked position to automatically latch door upon closing. Each lock has the adjusting screw on... ... more | go to store |
This is a standard pneumatic screen door closer for medium weight wood or aluminum out swinging doors. It has a 10-1/2 in. long barrel and has a black finish. It comes complete with mounting brackets and attaching hardware. It has adjustable closing... ... more | go to store |
This sliding doorkeeper is constructed from zinc-plated steel. This keeper reinforces the latch hole on the door jamb. This style keeper is used on Adams Rite and other similar styled doors. | Prime-Line Sliding Door Keeper Plated Steel (Single... ... more | go to store |
Red bushing spiral balance, for the sash. Used to counter-weight the moving sash on single and double hung windows. Fits window styles that tilt in for cleaning. This spiral balance does not include an end clip and must be ordered separately. Size:... ... more | go to store |
Red bushing spiral balance, for sash, weights up to 25 pounds. Used to counter-weight the moving sash on single and double-hung windows. Fits window styles that tilt in for cleaning. This spiral balance does not include an end clip and must be... ... more | go to store |
Used to counter-weight the moving sash on single and double-hung windows. Fits window styles that tilt in for cleaning. This spiral balance does not include an end clip and must be ordered separately. Finish: Red, Size: 0.44" H x 2" W x 32.5" D |... ... more | go to store |
This is an awning operator of aluminum diecast construction with an aluminum painted finish used on Stanley windows. It is left-handed with a matching crank handle with an offset link arm. It has a reversed L-shaped mounting hole pattern with one... ... more | go to store |
These fully assembled screens are constructed of white aluminum frame, plastic corners and glide brackets with gray fiberglass mesh. For aesthetic purposes, some only use these screens seasonally, as they prefer to not have permanently affixed... ... more | go to store |
Ads related to Prime-Line Single 1-1/8 in. Ball Bearing Roller, E-Tab Style, Adjustable Single Pack 5.44 H x 3.81 W x 0.63 D in brown in Zinc Plated | Wayfair