You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
This T-handle is a diecast universal awning operator T-handle. It has a 3/8 in. bore that fits most common awning operators (see Prime-Line parts H 3554 or H 3555). It has a gray finish to match the gray finish found on most awning operators in the... ... more | go to store |
This is one of several keepers or strikes used by the various casement, project-out, transom, or hopper window locks. It provides a surface for the lock to strike against while causing the lock to tighten as it slides up the angled surface of the... ... more | go to store |
This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
This casement window operator is a left-handed bronze square body type. It has an 8 in. steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the Prime-Line part H 3529 casement track are... ... more | go to store |
This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator. | Prime-Line Channel... ... more | go to store |
This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
Features:Material: NylonPin type: Bottom pivotFor bi-fold doorsProduct Type: Shutter/Door AccessoryStyle: Modern & ContemporaryFinish: WhiteHinge Included: YesHinge Type: PivotPin Type: Door Type: InteriorCountry of Origin: ChinaImported:... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
This is a black plastic housing sliding window roller assembly. It features a flat-edged plastic wheel with a 3/4 in. outside diameter, with stainless steel ball bearings. | Prime-Line 3/4 in, Black Plastic, Sliding Window Roller w/ Stainless Steel... ... more | go to store |
This patio door roller is constructed from steel and has a diameter of 1-1/4 in. It comes affixed to an adjustable aluminum housing assembly. This roller is used on Miller Industries and similar styled patio doors. | Prime-Line Sliding Door Roller... ... more | go to store |
Prime-line part F 2917 is a window sash lock for use on single-hung and double-hung vertical sliding windows. This item includes a sash lock, keeper, fasteners, and easy-to-follow installation instructions. These locks are constructed of diecast and... ... more | go to store |
This is the replacement inner housing that fits into the Prime-Line part D 1545 outer housing. It has a 1-1/2 in. steel ball bearing roller installed in the stamped steel inner housing. If needed, the adjusting screw can be backed out of the old roller... ... more | go to store |
This is a U-back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting... ... more | go to store |
Prime-line part F 2915 is a window sash lock for use on single-hung and double-hung vertical sliding windows. This item includes a sash lock, keeper, fasteners, and easy-to-follow installation instructions. These locks are constructed of diecast and... ... more | go to store |
This is a Plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 27/32 in. flare, 1-1/8 in. tall and 2-7/16 in. long. It is rear adjusting with a... ... more | go to store |
Prime-line part F 2915 is a window sash lock for use on single-hung and double-hung vertical sliding windows. This item includes a sash lock, keeper, fasteners, and easy-to-follow installation instructions. These locks are constructed of diecast and... ... more | go to store |
This is a U-back, patio door roller assembly with a flat 1-1/2 in. ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw or bolt is... ... more | go to store |
Prime-line part F 2919 is a vinyl window sweep latch for use on single-hung and double-hung vertical sliding windows. This item includes a latch, fasteners, and easy-to-follow installation instructions. These bronze-colored latches are constructed of... ... more | go to store |
It comes affixed to a nylon housing that can adjust for anti-lift protection. This style roller is used on Hilite 200 series sliding windows. | Prime-Line Sliding Window Roller Assembly, 1/2 in. Flat Steel Roller in White | 5.44 H x 3.82 W x 0.63 D in... ... more | go to store |
These casement operator tee crank handles are constructed of zinc diecast and come in a white painted finish. They a low-profile style crank design that make them the crank of choice where traditional long-arm cranks interfere with window coverings.... ... more | go to store |
This is a flat-edged roller and axle. Flat zinc plated steel roller. Constructed with a plastic axle pin. Used on Premier and Keller windows. | Prime-Line 1/2 in. Flat Steel Sliding Window Roller, w/ Axle Pins, Keller in White/Yellow | 5.44 H x 3.82 W... ... more | go to store |
This is a C-tab patio door roller assembly with a 1-1/8 in. diameter concave, or grooved, steel ball bearing roller. As the C-shaped tab fits around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on... ... more | go to store |
These aluminum screen hanger sets by make-2-fit are constructed of aluminum and steel components and come in a corrosion-resistant, bronze-plated finish. Included with these sets are two screen hangers, one spline channel bail latch, a ball-head screw,... ... more | go to store |
Prime-line part F 2915 is a window sash lock for use on single-hung and double-hung vertical sliding windows. This item includes a sash lock, keeper, fasteners, and easy-to-follow installation instructions. These locks are constructed of diecast and... ... more | go to store |
These aluminum screen hanger sets by make-2-fit are constructed of aluminum and steel components and come in a corrosion-resistant, bronze-plated finish. Included with these sets are two screen hangers, one spline channel bail latch, a ball-head screw,... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It is 9/16 in. wide with a 13/16 in. flare, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 10-32 threaded mounting hole on the... ... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 3/4 in. wide with a 27/32 in. flare, and is 1-9/16 in. tall. It features a rear adjusting screw with a 1/4-20... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 21/32 in. wide with a 3/4 in. flare and 1-1/8 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
This is a E-tab patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 23/32 in.... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 19/32 in. wide with a 23/32 in. flare and 1-3/16 in. tall. It is rear adjusting with a 3/16 in. diameter mounting... ... more | go to store |
This is a unique back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It's has a tab design on the bottom back edge that snaps the roller assembly into place on the door stile edge before being held in place by a mounting... ... more | go to store |
This is a sliding window roller is constructed from steel. It features a 5/8 in. center grooved ball bearing roller affixed to a white plastic housing. It boasts a snap-in design with 2 position height adjustment. | Prime-Line 5/8 in, White Plastic w/... ... more | go to store |
Ads related to Prime-Line Tee Handle Casement Operator, Andersen 2 Pack, Steel in White | 5.44 H x 3.82 W x 0.88 D in | Wayfair H 3814